• News
• ۰
• ۳۴۷
• ۱۴۰۰/۰۹/۲۸

  Recently researchers at the National University of Singapore, have been used chitosan methacrylate and PCL as base hydrogel and backing layer respectively to fabricate customizable wound dressings via 3D printing. Synthesized chitosan methacrylate is evaluated to be printable,...

• News
• ۰
• ۵۰۵
• ۱۴۰۰/۰۸/۱۵

Researchers have used the digital light processing (DLP) printing technique to develop dexamethasone-loaded punctal plugs. In this study, dexamethasone was used as an anti-inflammatory steroid drug in the treatment of corneal diseases. Punctal plugs with different drug loadings were...

• 3DBioprinting, News
• ۰
• ۴۷۱
• ۱۴۰۰/۰۷/۰۴

An integrated and heterogeneous soft-hard construct was successfully assembled as a lock-key structure by 3D cell printing. This 3D printed soft-hard construct has the potential to be a customized plug in alveolar ridge preservation. reference: Zhang, S., Li, Q.,...

• Bioprinting Event, News
• ۰
• ۴۹۲
• ۱۴۰۰/۰۵/۱۳

Recently, Korean researchers presents a method for producing hepatic-lobule-like microtissue spheroids using a bioprinting system and microfluidic emulsification system.  A noteworthy point in this study is the use of a precursor cartridge to create a specific pattern in how...

• 3DBioprinting, News
• ۰
• ۴۵۷
• ۱۴۰۰/۰۵/۰۵

A group of researchers has developed a printed structure composed of GelMA and Alginate bioinks with anisotropic mechanical properties. In this study, it was shown that the mechanical properties of the scaffold can be tunable by creating a striped...

• 3DBioprinting, News, Recently News
• ۰
• ۴۹۸
• ۱۴۰۰/۰۴/۲۲

Researchers at the University of California have developed a high-throughput technique for 3D bioprinting. Their printing method can yield a 96-well plate with tissue samples in each well in as little as 30 minutes. This approach would be useful...

• 3DBioprinting, Bioprinting Event, News
• ۰
• ۳۹۱
• ۱۴۰۰/۰۴/۱۵

In a study by Cellink researchers, a full thickness skin tissue model was bioprinted. In this study, the dermis was bioprinted using primary dermal fibroblasts embedded in GelMA based bioink, and the epidermis, containing a high concentration of keratinocytes...

• 3DBioprinting, News, Recently News
• ۰
• ۳۵۲
• ۱۴۰۰/۰۳/۲۵

AllGbone©, the new product of Omidafarinan Co. is a bioink based on extracellular matrix (ECM) of natural bone tissue, which is designed and developed for bone tissue engineering applications. The superiority of this product over the others is its...

• 3DBioprinting, Bioprinting Event, uncategorized
• ۰
• ۳۳۵
• ۱۴۰۰/۰۳/۰۴

Four-dimensional (4D) bioprinting, in which the concept of time is integrated with three-dimensional (3D) bioprinting as the fourth dimension, with the goal of constructing complex, functional structures. 4D bioprinting can be used to fabricate dynamic 3D-patterned biological architectures that...

• Bioprinting Event, News, Recently News
• ۰
• ۳۳۲
• ۱۴۰۰/۰۲/۰۷

Researchers developed a four axis extrusion-based additive manufacturing system based on fused deposition modeling (FDM) to create tubular hollow scaffolds. With this technique systematic changes in design can be made to alter the mechanical properties for the targeted tissue...

• News, Recently News
• ۰
• ۳۵۲
• ۱۴۰۰/۰۱/۲۴

Combined delivery of stem cells with the controlled release of osteogenic factors, within a mechanically-strong biomaterial combined during manufacturing would replace injectable defect fillers (cements) and allow personalized implants to be rapidly prototyped by 3D bioprinting. To this end,...

• News, Recently News
• ۰
• ۳۸۰
• ۱۴۰۰/۰۱/۱۷

With the aim of understanding cellular interactions of hepatocytes in their physiological microenvironment and to generate an artificial 3D in vitro model of liver, a co-culture system using 3D extrusion bioprinting was developed. In this method, bio-ink based on...

• News, Recently News
• ۰
• ۵۶۶
• ۱۳۹۹/۱۲/۲۴

Researchers have developed the first 3D-printable ‘bottlebrush’ elastomer. The new material results in printed objects that have unusual softness, elasticity and mechanical properties that closely resemble those of human tissue. Unique molecular structure of bottlebrush elastomers facilitate bioprinting in...

• 3DBioprinting, News
• ۰
• ۳۶۸
• ۱۳۹۹/۱۲/۱۲

A collaboration led by researchers at Carnegie Mellon University (PA, USA) has reported a COVID-19 antibody detection method created using aerosol jet 3D printing able to report detection within seconds, a breakthrough that could significantly improve studies of vaccine...

• 3DBioprinting, News, Recently News
• ۰
• ۳۹۲
• ۱۳۹۹/۱۱/۲۸

A team of researchers at UNSW (Sydney, Australia) develops a novel, ceramic-based ink to print bone-like structures that harden within minutes of being placed in water.   REFERENCE: Romanazzo S, Molley TG, Nemec S et al. Synthetic bone-like structures...

• News, Recently News
• ۰
• ۴۷۹
• ۱۳۹۹/۱۱/۲۱

A team of Iranian researchers used a novel technique to print sodium alginate cardiac patches using OmidAfarinan bioprinters. The results indicated that the prepared patch can be a suitable candidate for treating the cardiac scars after cardiovascular disease. reference:...

• 3DBioprinting, News, Recently News
• ۰
• ۴۰۴
• ۱۳۹۹/۱۱/۰۷

The TRIANKLE consortium made up of 12 European organizations has come together to develop bioprinted, personalized scaffolds for ankle joint tissue regeneration.   reference: https://www.3dmednet.com/ https://www.cellink.com/

• News, Recently News
• ۰
• ۴۴۸
• ۱۳۹۹/۱۰/۰۹

US researchers have developed a new bioprinting technique that uses ultrasonic standing bulk acoustic waves (SBAW) to organize cells into controllable anisotropic patterns within viscous bioinks while maintaining high cell viability. This work represents a step forward in advancing...

• News, Recently News
• ۰
• ۳۴۲
• ۱۳۹۹/۱۰/۰۲

Korean researchers have designed a 3D printed composite scaffold that can be combined simultaneously with bone grafts and fixtures to minimize the cost and duration of dental implant surgery. Further, by using 3D printing technology in making this implant,...

• News, Recently News
• ۰
• ۳۸۵
• ۱۳۹۹/۰۹/۱۱

A team of Australian researchers apply extrusion-based three-dimensional cellular bioprinting to deliver rapid and high-throughput generation of kidney organoids with highly reproducible cell number and viability. Automated extrusion-based bioprinting for kidney organoid production delivers improvements in throughput, quality control,...

• News, Recently News
• ۰
• ۳۹۲
• ۱۳۹۹/۰۹/۰۴

Japanese researchers have developed a stress-free and media-direct-dispensing inkjet bioprinter that exhibited cell-friendly dispensing performance, which was similar to the manual dispensing operation, based not only on cell viability but also on gene expression levels. reference: https://www.nature.com/articles/s41598-020-64193-z Yumoto M,...

• News
• ۰
• ۴۰۳
• ۱۳۹۹/۰۸/۲۰

Using three-dimensional printed structures with vascular networks is considered as a novel cell-based therapy for regenerative medicine applications. A team of researchers at the University of Otago (New Zealand) reports a promising strategy using core shell extrusion 3D bioprinting...

• 3DBioprinting, News
• ۰
• ۷۷۳
• ۱۳۹۹/۰۸/۱۲

One of the most common hereditary craniofacial anomalies in humans are cleft lip and cleft alveolar bone with or without cleft palate. German researchers developed a novel therapy concept based on 3D printing of biodegradable calcium phosphate-based materials allowing...

• News
• ۰
• ۵۵۳
• ۱۳۹۹/۰۷/۲۹

In a study recently published in Materials Today Bio, researchers from Osaka University have used silk nanofibers obtained by mechanical disintegration to enhance the printing process without damaging the cells or cell assemblies. reference: https://www.3dmednet.com/silk-fibers-provide-integrity-and-prevent-cell-damage-in-3d-printed-biological-constructs/ Sakai S, Yoshii A,...