فناوری ملی چاپ سه بعدی زیستی

BioFab

The BioFab series

Printing on the edge of technology

The BioFab 3D bioprinters provide a wide range of biological materials for the production of tissues such as the cardiac, skin, cartilage, or bone, by relying on the pneumatic actuator system, and thus the user has the freedom to select the biomaterials for the desired tissue.

BioFabX2

BioFabX2 with two printing modules allows you to print a variety of bio- and cellular materials simultaneously.

More

Technical specifications:

Print up to 2 separate biomaterials simultaneously
Pneumatic actuator system
Separated height control of each module
High-temperature printing module up to 250 ° C
The ability to install a low-temperature printing module down to -20 ° C
Ability to control the print surface temperature up to 80° C
UV crosslinking with wavelength from 365 to 405 nm
Ability to crosslink with visible light
The possibility of using Luer Lock needles with an inside diameter of 0.1 to 1 mm
Motion accuracy up to 0.01 mm
The print speed is from 0.1 to 150 mm/s
Print dimensions of the 90 * 90 * 60 mm
Ability to install the FDM module
The 3-inch touch screen user interface
Metallic body with a furnace color
The ability to install a HEPA14 filter and fan to create a sterile environment
UV light sterilization with UVC lamp
Proprietary software
Line monitoring and reporting system of the print process
Automatic calibration
Bioprinter Dimensions: 450×400×570
weight: 35 kg
تصویر: BioFabX2

BioFabX4

دستگاه چاپگر سه بعدی زیستی سری BioFab مدل BioFabX4 با چهار ماژول چاپ، امکان پرینت انواع مواد زیستی و سلولی را به صورت همزمان فراهم می­کند ، این محصول یک فناوری مدرن ایرانی است که میتوانید اطلاعات اختصاصی آن را در ادامه ببینید.

More

Technical specifications:

Print up to 2 separate biomaterials simultaneously
Pneumatic actuator system
Separated height control of each module
High-temperature printing module up to 250 ° C
The ability to install a low-temperature printing module down to -20 ° C
Ability to control the print surface temperature up to 80° C
UV crosslinking with wavelength from 365 to 405 nm
Ability to crosslink with visible light
The possibility of using Luer Lock needles with an inside diameter of 0.1 to 1 mm
Motion accuracy up to 0.01 mm
The print speed is from 0.1 to 150 mm/s
Print dimensions of the 90 * 90 * 60 mm
Ability to install the FDM module
The 3-inch touch screen user interface
Metallic body with a furnace color
The ability to install a HEPA14 filter and fan to create a sterile environment
UV light sterilization with UVC lamp
Proprietary software
Line monitoring and reporting system of the print process
Automatic calibration
device dimensions: 480×360×820 mm
تصویر: BioFabX4

Categories

انتخاب آسان است وقتی مسیرها مشخص باشد