3d-bio
3d-bio
3d-bio
3d-bio
3d-bio

This page is archived based on 3D printer products.

تصویر: Vascularized cell-laden 3D bioprinted wound dressings for regenerative medicine applications

Vascularized cell-laden 3D bioprinted wound dressings for regenerative medicine applications

  • News
  • ۰
  • ۱۴
  • ۱۳۹۹/۰۸/۲۰

Using three-dimensional printed structures with vascular networks is considered as a novel cell-based therapy for regenerative medicine applications. A team of researchers at the University of Otago (New Zealand) reports a promising strategy using core shell extrusion 3D bioprinting...

تصویر: Enhancement of 3D cell printing by using silk nanofibers

Enhancement of 3D cell printing by using silk nanofibers

  • News
  • ۰
  • ۴۶
  • ۱۳۹۹/۰۷/۲۹

In a study recently published in Materials Today Bio, researchers from Osaka University have used silk nanofibers obtained by mechanical disintegration to enhance the printing process without damaging the cells or cell assemblies. reference: https://www.3dmednet.com/silk-fibers-provide-integrity-and-prevent-cell-damage-in-3d-printed-biological-constructs/ Sakai S, Yoshii A,...

تصویر: Bioprinting and computer modeling facilitates study of cancer spread in blood vessels.

Bioprinting and computer modeling facilitates study of cancer spread in blood vessels.

A team of scientists from the Lawrence Livermore National Laboratory (CA, USA) has used bioprinted, living brain vasculature models in tandem with computer modeling simulations to provide insights on why cancer cells metastasize in certain areas of the vasculature....

تصویر: Novel bioprinting platform supports bone regeneration

Novel bioprinting platform supports bone regeneration

A collaborative team from the SFI Research Centre for Advanced Materials and Bioengineering Research (AMBER; Dublin, Republic of Ireland) and the Trinity Centre for Biomedical Engineering at Trinity College Dublin (Republic of Ireland) has developed a novel bioprinting platform...

تصویر: Bioprinting of Beating Heart Tissue with human induced pluripotent stem cells (hiPSCs)

Bioprinting of Beating Heart Tissue with human induced pluripotent stem cells (hiPSCs)

Researchers at the University of Minnesota (UMN) by developing a new bio-ink were able to bioprint a centimeter-scale heart pump with real human cells. The extracellular matrix (ECM)-based bioink used in this study enabled stem cells to proliferate before differentiation, allowing the team...

تصویر: Emerging Trends of Bioengineering Technologies: Webinars by International Speakers

Emerging Trends of Bioengineering Technologies: Webinars by International Speakers

The new round of 3D Bio Club webinars titled “Emerging Trends of Bioengineering Technologies” is organized in collaboration of OmidAfarinan and RASA companies. In this section of webinars, international speakers talk about new trends in bioengineering, especially 3D bioprinting,...

تصویر: Anatomical-scale functional bone tissues are developed by 3D bioprinting of nanoengineered bioinks

Anatomical-scale functional bone tissues are developed by 3D bioprinting of nanoengineered bioinks

Designing patient-specific bone grafts by 3D-bioprinting technology has gathered a great deal of attention from researchers and clinicians. In this vein, a research group at Texas A&M University has developed an advanced bioink known as Nanoengineered Ionic–Covalent Entanglement (NICE)...

تصویر: The First 3D Bioprinting Experiment In Space Is Achieved

The First 3D Bioprinting Experiment In Space Is Achieved

  • News
  • ۰
  • ۱۱۱
  • ۱۳۹۹/۰۲/۲۸

In a collaboration between the Geneva Foundation (Geneva), the Uniformed Services University of the Health Sciences (USU), commercial space company TechShot, Inc, and 3D printer manufacturer nScrypt, Inc, the first bioprinting project in space about the engineering of the...

تصویر: ۳D bioprinting of constructs made of hydrogels and thermoplastic polymers for articular cartilage engineering

۳D bioprinting of constructs made of hydrogels and thermoplastic polymers for articular cartilage engineering

In a national collaboration of Spain scientists, a new bio-ink made of alginate and hyaluronic acid was developed for articular cartilage engineering. To provide the mechanical properties required in cartilage tissue, Polylactic acid was co-printed with the cell-encapsulated hydrogel....

تصویر: ۳D-Printing Responds to Covid-19 Outbreak: A Review on Simple and Feasible Ideas

۳D-Printing Responds to Covid-19 Outbreak: A Review on Simple and Feasible Ideas

With the outbreak of the coronavirus, the daily activities have been significantly disrupted. Therefore, the efforts of many research institutes in the world are focused on combating the spread of the virus. In this session of 3D Bio Club,...

تصویر: Priming mesenchymal stem cells in vivo: A game-changer to treat myocardial infarction induced hearts

Priming mesenchymal stem cells in vivo: A game-changer to treat myocardial infarction induced hearts

Despite the great potential of mesenchymal stem cells in various regeneration therapies, their application to treat myocardial infarction (MI)–induced hearts is limited. In  recent research by an international joint research team of POSTECH, Seoul St. Mary’s Hospital, and City...

تصویر: Development of functional scaffolds for bone tissue engineering using 3D-bioprinting

Development of functional scaffolds for bone tissue engineering using 3D-bioprinting

Extrusion-based 3D-printing is among the additive manufacturing (AM) techniques that have attracted much attention for the fabrication of bone tissue engineering scaffolds with defined geometries and internal structure. The aim of the studies performed in this thesis was to...

تصویر: Development of high performance nano- bioink

Development of high performance nano- bioink

Despite considerable development of bioprinting methods, real applications in tissue engineering are still limited due to challenges in development of a suitable bioink with high printability and cell viability. Therefore, we will host Dr. Zandi for the introduction of...

تصویر: ۳D-Bio Club: 3D Bioprinting novel applications

۳D-Bio Club: 3D Bioprinting novel applications

Due to Covid-19 outbreak, OmidAfarinan team decided to hold an online webinar entitled “۳D Bioprinting Novel Applications” from “۳D-Bio Club” series. In this session, Mr. Majid Hajihosseinali as the co-founder and CEO at OmidAfarinan Company, will discuss the recent...

تصویر: (A Handheld 3D Bioprinter is Developed to Reconstruct Volumetric Muscle Loss (VML

(A Handheld 3D Bioprinter is Developed to Reconstruct Volumetric Muscle Loss (VML

Reconstructive surgery is yet not successful in the regeneration of volumetric muscle loss (VML). The defect geometry is patient dependent which limits the reliability of many common methods. 3D bioprinting, as a new emerging technology, can circumvent many of...

تصویر: The importance of neural and muscular cells integration in 3D bioprinted skeletal muscle constructs

The importance of neural and muscular cells integration in 3D bioprinted skeletal muscle constructs

Regenerative medicine has been promised regeneration of muscular constructs that mimic structural and functional characteristics of native skeletal muscles. Recently, scientists at Wake Forest Institute for Regenerative Medicine (WFIRM), have accelerated restoration of skeletal muscle through integration of neural...

تصویر: A New Kit from Omiad Afarinan Company for Printing of Hollow and Core/Shell structures

A New Kit from Omiad Afarinan Company for Printing of Hollow and Core/Shell structures

Nowadays, technologies such as 3D bioprinting boost the fabrication of various tissue and organ models. One of the challenging models is tubular structures preset in various body parts. Omid Afarinan company has recently provided an innovative kit named 3DbioHollow®...

تصویر: Fabrication of Hydrogel Fibers with Controllable Biophysical and Biochemical Features

Fabrication of Hydrogel Fibers with Controllable Biophysical and Biochemical Features

Hydrogel structures with morphological features at microscale have various applications in tissue engineering and regenerative medicine due to their ability to induce cellular behavior in a controlled and desired manner. In a very recent study managed by Iranian researchers...

تصویر: A New Product from Omiad Afarinan Company for Treatment of Bone Defects

A New Product from Omiad Afarinan Company for Treatment of Bone Defects

۳D printing can be used for many industrial and biomedical purposes. Omid Afarinan company has recently produced an innovative product named Cranio® for treatment of diseases such as craniosynostosis, hemifacial microsomia (HFM), and hypertelorism in which a person is inflicted...

تصویر: ۳D Bioprinting Technology in Plant Science: A New Approach

۳D Bioprinting Technology in Plant Science: A New Approach

Over the last decade, the development of technologies such as 3D bioprinting has engendered paradigm shift in many scientific areas including plant biology. For instance, 3D bioprinted constructs of plant cells or inspired by plants decipher information about single-cell,...

تصویر: Experts at OmidAfarinan Mohandesi Ayande Hold Special Training Courses and Workshops

Experts at OmidAfarinan Mohandesi Ayande Hold Special Training Courses and Workshops

For the first time, the team of experts at OmidAfarinan Mohandesi Ayande, the first commercial group focusing on 3D Bioprinting in Iran, hold Special Training Courses and Workshops in the following context Training (Theoretical And Practical) Workshops Comprehensive Course...

تصویر: Creation of full-thickness skin in the very near future using a new 3D bioprinting technique

Creation of full-thickness skin in the very near future using a new 3D bioprinting technique

Scientists at the University of Huddersfield have pioneered the development of a new technique (named SLAM) for using 3D printing to produce soft gel medical implants customized to the needs of individual patients      

تصویر: Patient‐Specific 3D Bioprinted Model for treatment of pediatric cardiology

Patient‐Specific 3D Bioprinted Model for treatment of pediatric cardiology

     In a collaboration between Georgia Tech, Emory and Children’s Healthcare of Atlanta, a patient‐specific 3D bioprinted model based on modified gelatin was developed for treatment of pediatric cardiology  

تصویر: The First International One-day Symposium on Additive Manufacturing and Bioprinting

The First International One-day Symposium on Additive Manufacturing and Bioprinting

First International one-day symposium on Additive Manufacturing” will be held in Tehran at AmirKabir University of Technology on January 22, 2020. Major attractions of this event would revolve around workshop, oral presentations, competition and exhibition. 3D bioprinting competition and...