• 3DBioprinting, News, Technology
• ۰
• ۶۶۵
• ۱۳۹۹/۰۲/۱۶

In a national collaboration of Spain scientists, a new bio-ink made of alginate and hyaluronic acid was developed for articular cartilage engineering. To provide the mechanical properties required in cartilage tissue, Polylactic acid was co-printed with the cell-encapsulated hydrogel....

• 3DBioprinting, Bioprinting Event, Technology
• ۰
• ۵۳۸
• ۱۳۹۹/۰۲/۱۴

With the outbreak of the coronavirus, the daily activities have been significantly disrupted. Therefore, the efforts of many research institutes in the world are focused on combating the spread of the virus. In this session of 3D Bio Club,...

• News, Technology
• ۰
• ۴۷۵
• ۱۳۹۹/۰۲/۰۹

Despite the great potential of mesenchymal stem cells in various regeneration therapies, their application to treat myocardial infarction (MI)–induced hearts is limited. In  recent research by an international joint research team of POSTECH, Seoul St. Mary’s Hospital, and City...

• 3DBioprinting, Bioprinting Event, Workshops
• ۰
• ۷۰۸
• ۱۳۹۹/۰۲/۰۷

Extrusion-based 3D-printing is among the additive manufacturing (AM) techniques that have attracted much attention for the fabrication of bone tissue engineering scaffolds with defined geometries and internal structure. The aim of the studies performed in this thesis was to...

• 3DBioprinting, Technology, Workshops
• ۰
• ۱۵
• ۱۳۹۹/۰۱/۳۱

Despite considerable development of bioprinting methods, real applications in tissue engineering are still limited due to challenges in development of a suitable bioink with high printability and cell viability. Therefore, we will host Dr. Zandi for the introduction of...

• 3DBioprinting, Bioprinting Event, Workshops
• ۰
• ۵۵۷
• ۱۳۹۹/۰۱/۲۴

Due to Covid-19 outbreak, OmidAfarinan team decided to hold an online webinar entitled “۳D Bioprinting Novel Applications” from “۳D-Bio Club” series. In this session, Mr. Majid Hajihosseinali as the co-founder and CEO at OmidAfarinan Company, will discuss the recent...

• uncategorized
• ۰
• ۴۶۵
• ۱۳۹۸/۱۲/۲۵

Reconstructive surgery is yet not successful in the regeneration of volumetric muscle loss (VML). The defect geometry is patient dependent which limits the reliability of many common methods. 3D bioprinting, as a new emerging technology, can circumvent many of...

• News, Technology
• ۰
• ۸۰۹
• ۱۳۹۸/۱۲/۱۲

Regenerative medicine has been promised regeneration of muscular constructs that mimic structural and functional characteristics of native skeletal muscles. Recently, scientists at Wake Forest Institute for Regenerative Medicine (WFIRM), have accelerated restoration of skeletal muscle through integration of neural...

• 3DBioprinting, News, Technology
• ۰
• ۵۵۲
• ۱۳۹۸/۱۲/۰۴

Nowadays, technologies such as 3D bioprinting boost the fabrication of various tissue and organ models. One of the challenging models is tubular structures preset in various body parts. Omid Afarinan company has recently provided an innovative kit named 3DbioHollow®...

• 3DBioprinting, News, Technology
• ۰
• ۴۷۹
• ۱۳۹۸/۱۱/۲۷

Hydrogel structures with morphological features at microscale have various applications in tissue engineering and regenerative medicine due to their ability to induce cellular behavior in a controlled and desired manner. In a very recent study managed by Iranian researchers...

• 3DBioprinting, Activities, Technology
• ۰
• ۷۲۳
• ۱۳۹۸/۱۱/۲۱

۳D printing can be used for many industrial and biomedical purposes. Omid Afarinan company has recently produced an innovative product named Cranio® for treatment of diseases such as craniosynostosis, hemifacial microsomia (HFM), and hypertelorism in which a person is inflicted...

• News, news 1, Technology
• ۰
• ۱۰۸۷
• ۱۳۹۸/۱۱/۱۳

Over the last decade, the development of technologies such as 3D bioprinting has engendered paradigm shift in many scientific areas including plant biology. For instance, 3D bioprinted constructs of plant cells or inspired by plants decipher information about single-cell,...

• Bioprinting Event, Technology, Workshops
• ۰
• ۴۷۱
• ۱۳۹۸/۱۱/۰۶

For the first time, the team of experts at OmidAfarinan Mohandesi Ayande, the first commercial group focusing on 3D Bioprinting in Iran, hold Special Training Courses and Workshops in the following context Training (Theoretical And Practical) Workshops Comprehensive Course...

• 3DBioprinting, News
• ۰
• ۴۵۰
• ۱۳۹۸/۱۰/۳۰

Scientists at the University of Huddersfield have pioneered the development of a new technique (named SLAM) for using 3D printing to produce soft gel medical implants customized to the needs of individual patients      

• News, Technology
• ۰
• ۴۵۲
• ۱۳۹۸/۱۰/۲۲

     In a collaboration between Georgia Tech, Emory and Children’s Healthcare of Atlanta, a patient‐specific 3D bioprinted model based on modified gelatin was developed for treatment of pediatric cardiology  

• uncategorized
• ۰
• ۷۵۴
• ۱۳۹۸/۱۰/۱۸

First International one-day symposium on Additive Manufacturing” will be held in Tehran at AmirKabir University of Technology on January 22, 2020. Major attractions of this event would revolve around workshop, oral presentations, competition and exhibition. 3D bioprinting competition and...

• News
• ۰
• ۶۷۹
• ۱۳۹۸/۱۰/۰۹

Brizilian researchers have succeeded to create liver organoids using human blood cells. These mini-livers are able to perform all of the livers’ functions including production of vital proteins, storing vitamins, and bile secretion, to name a few. In this...

• 3DBioprinting, Technology
• ۰
• ۶۹۰
• ۱۳۹۸/۱۰/۰۱

The latest achievements of Omid Afarinan Mohandesi Ayandeh company in the field of 3D Bioprinting have been unveiled at the 7th IranLabExpo (Laboratory Equipment and Chemicals Exhibition) in the presence of Dr. Sattari, Vice President for Science and Technology...

• 3DBioprinting, Technology
• ۰
• ۶۵۵
• ۱۳۹۸/۰۹/۲۴

Recently, the manufacture of microfluidic chips has been provided by researchers of Omid Afarinan Co. using 3D printing technology. With this modern technology, researchers are able to perform many experiments at low cost  

• 3DBioprinting, Activities, Technology
• ۰
• ۴۶۶
• ۱۳۹۸/۰۹/۲۰

According to recent advances in bioprinting and to meet new needs from researchers, 3D-Bio introduced a new modular system for bioprinting a wide range of biomaterials. These printheads made 3D-Bio bioprinters one of the most flexible devices in the...

• 3DBioprinting, News, Technology
• ۰
• ۴۸۳
• ۱۳۹۸/۰۹/۰۹

The 4th international and 6th national Congress of Wound and Tissue Repair was held at Razi Conference Hall of Iran University of Medical Sciences from 19 to 22 November. Among the latest achievements in the field of dermatology, wound...

• 3DBioprinting, Activities, News, Recently News, Technology
• ۰
• ۵۲۷
• ۱۳۹۸/۰۸/۲۶

Restoration of bone defects requires creative strategies that can be applied to the hierarchical structure of bone tissue from the nanoscale to the macro. For this purpose, we have to select materials that provide porous structures, with cell compatibility,...

• uncategorized
• ۰
• ۵۷۳
• ۱۳۹۸/۰۸/۲۱

Researchers in South Korea have reported, 3D printed a biomimetic blood vessel – derived from human smooth muscle and endothelial cells – bringing 3D printed vascular structures a step closer to clinical use Reference

• uncategorized
• ۰
• ۵۳۲
• ۱۳۹۸/۰۷/۲۸

Researchers from the Wyss Institute and Harvard demonstrated a new biomanufacturing method, known as SWIFT, which uses stem-cell-derived OBB tissue matrices that exhibit the requisite cell density, microarchitecture, and function approaching that of native tissues.     Reference