• News, Recently News
• ۰
• ۵۱۰
• ۱۳۹۹/۰۷/۲۲

A team of scientists from the Lawrence Livermore National Laboratory (CA, USA) has used bioprinted, living brain vasculature models in tandem with computer modeling simulations to provide insights on why cancer cells metastasize in certain areas of the vasculature....

• News, Recently News
• ۰
• ۶۱۰
• ۱۳۹۹/۰۷/۱۵

A team of researchers from Linköping University (Sweden) has developed a modular and 3D printable hyaluronan-based hydrogels to keep cells alive throughout the printing process. reference Aronsson, C., Jury, M., Naeimipour, S., Boroojeni, F. R., Christoffersson, J., Lifwergren, P.,...

• News, Recently News
• ۰
• ۴۷۷
• ۱۳۹۹/۰۷/۰۸

A novel 3D-printed capsule, developed by a team at Purdue University (IL, USA), could allow for the collection of bacteria samples from throughout the gastrointestinal tract, improving on conventional sampling methods that may exclude areas for bacteria collection outside...

• News, Recently News
• ۰
• ۴۴۴
• ۱۳۹۹/۰۷/۰۱

A collaborative team from the SFI Research Centre for Advanced Materials and Bioengineering Research (AMBER; Dublin, Republic of Ireland) and the Trinity Centre for Biomedical Engineering at Trinity College Dublin (Republic of Ireland) has developed a novel bioprinting platform...

• 3DBioprinting, News, Recently News
• ۰
• ۴۹۵
• ۱۳۹۹/۰۶/۱۵

Gastric wall injury is one of the most common diseases in digestive tract and can lead to surgery if left untreated. Researchers from China’s Tsinghua University have developed a micro bioprinting robot that can treat gastric wounds from inside...

• News, Recently News
• ۰
• ۵۶۰
• ۱۳۹۹/۰۴/۲۴

Up to now, many methods have been presented to treat cardiovascular diseases as the first cause of human death worldwide. In a recent study by Finish scientists, multifunctional patches presenting suitable biocompatibility, electrical conductivity, and mechanical strength have been...

• 3DBioprinting, News, Recently News
• ۰
• ۷۷۸
• ۱۳۹۹/۰۴/۱۷

Despite the extensive advances in 3D bioprinting, its in vivo application has been limited to the cases with exposed traumas (such as burn wounds) or requires a surgical operation. In a recent study by Chinese scientists, the noninvasive in...

• News, Recently News
• ۰
• ۵۴۵
• ۱۳۹۹/۰۴/۱۷

Of the main challenges against the translation of tissue-engineered grafts is the lack of enough oxygen in thick tissues known as hypoxia. Interestingly, there is a category of materials that generate oxygen. In a recent study, a bioink of...

• News, Recently News
• ۰
• ۶۳۹
• ۱۳۹۹/۰۴/۱۰

A group of researchers from the University College London and the University of Padua (Italy) unveiled a minimally invasive 3D bioprinting technique that can be used for the fabrication of 3D constructs across and within tissues. This study results,...

• 3DBioprinting, News, Recently News
• ۰
• ۴۸۹
• ۱۳۹۹/۰۴/۰۳

In a collaboration between scientists from the Terasaki Institute for Biomedical Innovation, Ohio State University, and Pennsylvania State University, a gelatin-based bioink has been developed for 3D bioprinting tissue directly in the body. The method used to 3D print...

• News
• ۰
• ۵۷۷
• ۱۳۹۹/۰۲/۲۸

In a collaboration between the Geneva Foundation (Geneva), the Uniformed Services University of the Health Sciences (USU), commercial space company TechShot, Inc, and 3D printer manufacturer nScrypt, Inc, the first bioprinting project in space about the engineering of the...

• 3DBioprinting, News, Technology
• ۰
• ۷۶۷
• ۱۳۹۹/۰۲/۱۶

In a national collaboration of Spain scientists, a new bio-ink made of alginate and hyaluronic acid was developed for articular cartilage engineering. To provide the mechanical properties required in cartilage tissue, Polylactic acid was co-printed with the cell-encapsulated hydrogel....

• 3DBioprinting, Bioprinting Event, Technology
• ۰
• ۶۶۳
• ۱۳۹۹/۰۲/۱۴

With the outbreak of the coronavirus, the daily activities have been significantly disrupted. Therefore, the efforts of many research institutes in the world are focused on combating the spread of the virus. In this session of 3D Bio Club,...

• News, Technology
• ۰
• ۵۵۱
• ۱۳۹۹/۰۲/۰۹

Despite the great potential of mesenchymal stem cells in various regeneration therapies, their application to treat myocardial infarction (MI)–induced hearts is limited. In  recent research by an international joint research team of POSTECH, Seoul St. Mary’s Hospital, and City...

• 3DBioprinting, Bioprinting Event, Workshops
• ۰
• ۸۳۶
• ۱۳۹۹/۰۲/۰۷

Extrusion-based 3D-printing is among the additive manufacturing (AM) techniques that have attracted much attention for the fabrication of bone tissue engineering scaffolds with defined geometries and internal structure. The aim of the studies performed in this thesis was to...

• 3DBioprinting, Technology, Workshops
• ۰
• ۱۵
• ۱۳۹۹/۰۱/۳۱

Despite considerable development of bioprinting methods, real applications in tissue engineering are still limited due to challenges in development of a suitable bioink with high printability and cell viability. Therefore, we will host Dr. Zandi for the introduction of...

• 3DBioprinting, Bioprinting Event, Workshops
• ۰
• ۶۵۱
• ۱۳۹۹/۰۱/۲۴

Due to Covid-19 outbreak, OmidAfarinan team decided to hold an online webinar entitled “۳D Bioprinting Novel Applications” from “۳D-Bio Club” series. In this session, Mr. Majid Hajihosseinali as the co-founder and CEO at OmidAfarinan Company, will discuss the recent...

• uncategorized
• ۰
• ۵۶۲
• ۱۳۹۸/۱۲/۲۵

Reconstructive surgery is yet not successful in the regeneration of volumetric muscle loss (VML). The defect geometry is patient dependent which limits the reliability of many common methods. 3D bioprinting, as a new emerging technology, can circumvent many of...

• News, Technology
• ۰
• ۹۲۱
• ۱۳۹۸/۱۲/۱۲

Regenerative medicine has been promised regeneration of muscular constructs that mimic structural and functional characteristics of native skeletal muscles. Recently, scientists at Wake Forest Institute for Regenerative Medicine (WFIRM), have accelerated restoration of skeletal muscle through integration of neural...

• 3DBioprinting, News, Technology
• ۰
• ۶۵۴
• ۱۳۹۸/۱۲/۰۴

Nowadays, technologies such as 3D bioprinting boost the fabrication of various tissue and organ models. One of the challenging models is tubular structures preset in various body parts. Omid Afarinan company has recently provided an innovative kit named 3DbioHollow®...

• 3DBioprinting, News, Technology
• ۰
• ۵۷۶
• ۱۳۹۸/۱۱/۲۷

Hydrogel structures with morphological features at microscale have various applications in tissue engineering and regenerative medicine due to their ability to induce cellular behavior in a controlled and desired manner. In a very recent study managed by Iranian researchers...

• 3DBioprinting, Activities, Technology
• ۰
• ۸۲۷
• ۱۳۹۸/۱۱/۲۱

۳D printing can be used for many industrial and biomedical purposes. Omid Afarinan company has recently produced an innovative product named Cranio® for treatment of diseases such as craniosynostosis, hemifacial microsomia (HFM), and hypertelorism in which a person is inflicted...

• News, news 1, Technology
• ۰
• ۱۲۴۷
• ۱۳۹۸/۱۱/۱۳

Over the last decade, the development of technologies such as 3D bioprinting has engendered paradigm shift in many scientific areas including plant biology. For instance, 3D bioprinted constructs of plant cells or inspired by plants decipher information about single-cell,...

• Bioprinting Event, Technology, Workshops
• ۰
• ۵۷۸
• ۱۳۹۸/۱۱/۰۶

For the first time, the team of experts at OmidAfarinan Mohandesi Ayande, the first commercial group focusing on 3D Bioprinting in Iran, hold Special Training Courses and Workshops in the following context Training (Theoretical And Practical) Workshops Comprehensive Course...