• News
• ۰
• ۵۵۴
• ۱۳۹۹/۰۷/۲۹

In a study recently published in Materials Today Bio, researchers from Osaka University have used silk nanofibers obtained by mechanical disintegration to enhance the printing process without damaging the cells or cell assemblies. reference: https://www.3dmednet.com/silk-fibers-provide-integrity-and-prevent-cell-damage-in-3d-printed-biological-constructs/ Sakai S, Yoshii A,...

• News, Recently News
• ۰
• ۴۲۹
• ۱۳۹۹/۰۷/۲۲

A team of scientists from the Lawrence Livermore National Laboratory (CA, USA) has used bioprinted, living brain vasculature models in tandem with computer modeling simulations to provide insights on why cancer cells metastasize in certain areas of the vasculature....

• News, Recently News
• ۰
• ۵۲۱
• ۱۳۹۹/۰۷/۱۵

A team of researchers from Linköping University (Sweden) has developed a modular and 3D printable hyaluronan-based hydrogels to keep cells alive throughout the printing process. reference Aronsson, C., Jury, M., Naeimipour, S., Boroojeni, F. R., Christoffersson, J., Lifwergren, P.,...

• News, Recently News
• ۰
• ۳۹۴
• ۱۳۹۹/۰۷/۰۸

A novel 3D-printed capsule, developed by a team at Purdue University (IL, USA), could allow for the collection of bacteria samples from throughout the gastrointestinal tract, improving on conventional sampling methods that may exclude areas for bacteria collection outside...

• News, Recently News
• ۰
• ۳۶۶
• ۱۳۹۹/۰۷/۰۱

A collaborative team from the SFI Research Centre for Advanced Materials and Bioengineering Research (AMBER; Dublin, Republic of Ireland) and the Trinity Centre for Biomedical Engineering at Trinity College Dublin (Republic of Ireland) has developed a novel bioprinting platform...

• News, Recently News
• ۰
• ۴۱۸
• ۱۳۹۹/۰۶/۲۵

A team of researchers from University of Wisconsin-Madison (WI, USA) has 3D printed an artery that monitors blood pressure to enable doctors to monitor cardiovascular health remotely. REFRENCE https://www.3dmednet.com/3d-printed-artery-monitors-blood-pressure-to-help-manage-cardiovascular-health/ Li J, Long Y, Yang F, Wei H, Zhang Z,...

• 3DBioprinting, News, Recently News
• ۰
• ۴۰۳
• ۱۳۹۹/۰۶/۱۵

Gastric wall injury is one of the most common diseases in digestive tract and can lead to surgery if left untreated. Researchers from China’s Tsinghua University have developed a micro bioprinting robot that can treat gastric wounds from inside...

• 3DBioprinting, Bioprinting Event, News, Recently News, uncategorized
• ۰
• ۴۴۰
• ۱۳۹۹/۰۵/۲۸

Researchers at the University of Minnesota (UMN) by developing a new bio-ink were able to bioprint a centimeter-scale heart pump with real human cells. The extracellular matrix (ECM)-based bioink used in this study enabled stem cells to proliferate before differentiation, allowing the team...

• News, Recently News, Workshops
• ۰
• ۱۴۰۹
• ۱۳۹۹/۰۵/۲۰

The new round of 3D Bio Club webinars titled “Emerging Trends of Bioengineering Technologies” is organized in collaboration of OmidAfarinan and RASA companies. In this section of webinars, international speakers talk about new trends in bioengineering, especially 3D bioprinting,...

• News, Recently News
• ۰
• ۳۹۲
• ۱۳۹۹/۰۵/۰۷

Despite the great advances in the regenerative medicine field, monitoring the metabolic changes of cultured cells during tissue formation is still an important challenge; which is caused by the limitations associated with the bulk volumetric assays. In recent research...

• News, Recently News
• ۰
• ۴۷۷
• ۱۳۹۹/۰۴/۲۴

Up to now, many methods have been presented to treat cardiovascular diseases as the first cause of human death worldwide. In a recent study by Finish scientists, multifunctional patches presenting suitable biocompatibility, electrical conductivity, and mechanical strength have been...

• 3DBioprinting, News, Recently News
• ۰
• ۶۸۰
• ۱۳۹۹/۰۴/۱۷

Despite the extensive advances in 3D bioprinting, its in vivo application has been limited to the cases with exposed traumas (such as burn wounds) or requires a surgical operation. In a recent study by Chinese scientists, the noninvasive in...

• News, Recently News
• ۰
• ۴۷۵
• ۱۳۹۹/۰۴/۱۷

Of the main challenges against the translation of tissue-engineered grafts is the lack of enough oxygen in thick tissues known as hypoxia. Interestingly, there is a category of materials that generate oxygen. In a recent study, a bioink of...

• News, Recently News
• ۰
• ۵۴۲
• ۱۳۹۹/۰۴/۱۰

A group of researchers from the University College London and the University of Padua (Italy) unveiled a minimally invasive 3D bioprinting technique that can be used for the fabrication of 3D constructs across and within tissues. This study results,...

• 3DBioprinting, News, Recently News
• ۰
• ۴۲۰
• ۱۳۹۹/۰۴/۰۳

In a collaboration between scientists from the Terasaki Institute for Biomedical Innovation, Ohio State University, and Pennsylvania State University, a gelatin-based bioink has been developed for 3D bioprinting tissue directly in the body. The method used to 3D print...

• News, Recently News
• ۰
• ۴۰۲
• ۱۳۹۹/۰۳/۱۳

Designing patient-specific bone grafts by 3D-bioprinting technology has gathered a great deal of attention from researchers and clinicians. In this vein, a research group at Texas A&M University has developed an advanced bioink known as Nanoengineered Ionic–Covalent Entanglement (NICE)...

• News, Recently News
• ۰
• ۶۳۱
• ۱۳۹۹/۰۳/۰۶

In cooperative research between the scientists in TU Wien and Stanford universities, it has been made possible to introduce nerve cells in spherical cage structures using acoustic bioprinting technology. This cell alignment in certain spots in a framework provides...

• News
• ۰
• ۴۸۳
• ۱۳۹۹/۰۲/۲۸

In a collaboration between the Geneva Foundation (Geneva), the Uniformed Services University of the Health Sciences (USU), commercial space company TechShot, Inc, and 3D printer manufacturer nScrypt, Inc, the first bioprinting project in space about the engineering of the...

• 3DBioprinting, News, Technology
• ۰
• ۶۶۶
• ۱۳۹۹/۰۲/۱۶

In a national collaboration of Spain scientists, a new bio-ink made of alginate and hyaluronic acid was developed for articular cartilage engineering. To provide the mechanical properties required in cartilage tissue, Polylactic acid was co-printed with the cell-encapsulated hydrogel....

• 3DBioprinting, Bioprinting Event, Technology
• ۰
• ۵۳۸
• ۱۳۹۹/۰۲/۱۴

With the outbreak of the coronavirus, the daily activities have been significantly disrupted. Therefore, the efforts of many research institutes in the world are focused on combating the spread of the virus. In this session of 3D Bio Club,...

• News, Technology
• ۰
• ۴۷۶
• ۱۳۹۹/۰۲/۰۹

Despite the great potential of mesenchymal stem cells in various regeneration therapies, their application to treat myocardial infarction (MI)–induced hearts is limited. In  recent research by an international joint research team of POSTECH, Seoul St. Mary’s Hospital, and City...

• 3DBioprinting, Bioprinting Event, Workshops
• ۰
• ۷۰۹
• ۱۳۹۹/۰۲/۰۷

Extrusion-based 3D-printing is among the additive manufacturing (AM) techniques that have attracted much attention for the fabrication of bone tissue engineering scaffolds with defined geometries and internal structure. The aim of the studies performed in this thesis was to...

• 3DBioprinting, Technology, Workshops
• ۰
• ۱۵
• ۱۳۹۹/۰۱/۳۱

Despite considerable development of bioprinting methods, real applications in tissue engineering are still limited due to challenges in development of a suitable bioink with high printability and cell viability. Therefore, we will host Dr. Zandi for the introduction of...

• 3DBioprinting, Bioprinting Event, Workshops
• ۰
• ۵۵۹
• ۱۳۹۹/۰۱/۲۴

Due to Covid-19 outbreak, OmidAfarinan team decided to hold an online webinar entitled “۳D Bioprinting Novel Applications” from “۳D-Bio Club” series. In this session, Mr. Majid Hajihosseinali as the co-founder and CEO at OmidAfarinan Company, will discuss the recent...