• 3DBioprinting, News, Recently News
• ۰
• ۴۰۲
• ۱۳۹۹/۰۶/۱۵

Gastric wall injury is one of the most common diseases in digestive tract and can lead to surgery if left untreated. Researchers from China’s Tsinghua University have developed a micro bioprinting robot that can treat gastric wounds from inside...

• News, Recently News
• ۰
• ۴۷۷
• ۱۳۹۹/۰۴/۲۴

Up to now, many methods have been presented to treat cardiovascular diseases as the first cause of human death worldwide. In a recent study by Finish scientists, multifunctional patches presenting suitable biocompatibility, electrical conductivity, and mechanical strength have been...

• 3DBioprinting, News, Recently News
• ۰
• ۶۷۹
• ۱۳۹۹/۰۴/۱۷

Despite the extensive advances in 3D bioprinting, its in vivo application has been limited to the cases with exposed traumas (such as burn wounds) or requires a surgical operation. In a recent study by Chinese scientists, the noninvasive in...

• News, Recently News
• ۰
• ۴۷۴
• ۱۳۹۹/۰۴/۱۷

Of the main challenges against the translation of tissue-engineered grafts is the lack of enough oxygen in thick tissues known as hypoxia. Interestingly, there is a category of materials that generate oxygen. In a recent study, a bioink of...

• News, Recently News
• ۰
• ۵۴۱
• ۱۳۹۹/۰۴/۱۰

A group of researchers from the University College London and the University of Padua (Italy) unveiled a minimally invasive 3D bioprinting technique that can be used for the fabrication of 3D constructs across and within tissues. This study results,...

• 3DBioprinting, News, Recently News
• ۰
• ۴۱۸
• ۱۳۹۹/۰۴/۰۳

In a collaboration between scientists from the Terasaki Institute for Biomedical Innovation, Ohio State University, and Pennsylvania State University, a gelatin-based bioink has been developed for 3D bioprinting tissue directly in the body. The method used to 3D print...

• News, Recently News
• ۰
• ۴۰۲
• ۱۳۹۹/۰۳/۱۳

Designing patient-specific bone grafts by 3D-bioprinting technology has gathered a great deal of attention from researchers and clinicians. In this vein, a research group at Texas A&M University has developed an advanced bioink known as Nanoengineered Ionic–Covalent Entanglement (NICE)...

• News, Recently News
• ۰
• ۶۳۱
• ۱۳۹۹/۰۳/۰۶

In cooperative research between the scientists in TU Wien and Stanford universities, it has been made possible to introduce nerve cells in spherical cage structures using acoustic bioprinting technology. This cell alignment in certain spots in a framework provides...

• News
• ۰
• ۴۸۱
• ۱۳۹۹/۰۲/۲۸

In a collaboration between the Geneva Foundation (Geneva), the Uniformed Services University of the Health Sciences (USU), commercial space company TechShot, Inc, and 3D printer manufacturer nScrypt, Inc, the first bioprinting project in space about the engineering of the...

• 3DBioprinting, News, Technology
• ۰
• ۶۶۶
• ۱۳۹۹/۰۲/۱۶

In a national collaboration of Spain scientists, a new bio-ink made of alginate and hyaluronic acid was developed for articular cartilage engineering. To provide the mechanical properties required in cartilage tissue, Polylactic acid was co-printed with the cell-encapsulated hydrogel....

• 3DBioprinting, Bioprinting Event, Technology
• ۰
• ۵۳۸
• ۱۳۹۹/۰۲/۱۴

With the outbreak of the coronavirus, the daily activities have been significantly disrupted. Therefore, the efforts of many research institutes in the world are focused on combating the spread of the virus. In this session of 3D Bio Club,...

• News, Technology
• ۰
• ۴۷۶
• ۱۳۹۹/۰۲/۰۹

Despite the great potential of mesenchymal stem cells in various regeneration therapies, their application to treat myocardial infarction (MI)–induced hearts is limited. In  recent research by an international joint research team of POSTECH, Seoul St. Mary’s Hospital, and City...

• 3DBioprinting, Bioprinting Event, Workshops
• ۰
• ۷۰۹
• ۱۳۹۹/۰۲/۰۷

Extrusion-based 3D-printing is among the additive manufacturing (AM) techniques that have attracted much attention for the fabrication of bone tissue engineering scaffolds with defined geometries and internal structure. The aim of the studies performed in this thesis was to...

• 3DBioprinting, Technology, Workshops
• ۰
• ۱۵
• ۱۳۹۹/۰۱/۳۱

Despite considerable development of bioprinting methods, real applications in tissue engineering are still limited due to challenges in development of a suitable bioink with high printability and cell viability. Therefore, we will host Dr. Zandi for the introduction of...

• 3DBioprinting, Bioprinting Event, Workshops
• ۰
• ۵۵۸
• ۱۳۹۹/۰۱/۲۴

Due to Covid-19 outbreak, OmidAfarinan team decided to hold an online webinar entitled “۳D Bioprinting Novel Applications” from “۳D-Bio Club” series. In this session, Mr. Majid Hajihosseinali as the co-founder and CEO at OmidAfarinan Company, will discuss the recent...

• uncategorized
• ۰
• ۴۶۵
• ۱۳۹۸/۱۲/۲۵

Reconstructive surgery is yet not successful in the regeneration of volumetric muscle loss (VML). The defect geometry is patient dependent which limits the reliability of many common methods. 3D bioprinting, as a new emerging technology, can circumvent many of...

• News, Technology
• ۰
• ۸۱۱
• ۱۳۹۸/۱۲/۱۲

Regenerative medicine has been promised regeneration of muscular constructs that mimic structural and functional characteristics of native skeletal muscles. Recently, scientists at Wake Forest Institute for Regenerative Medicine (WFIRM), have accelerated restoration of skeletal muscle through integration of neural...

• 3DBioprinting, News, Technology
• ۰
• ۵۵۲
• ۱۳۹۸/۱۲/۰۴

Nowadays, technologies such as 3D bioprinting boost the fabrication of various tissue and organ models. One of the challenging models is tubular structures preset in various body parts. Omid Afarinan company has recently provided an innovative kit named 3DbioHollow®...

• 3DBioprinting, News, Technology
• ۰
• ۴۸۰
• ۱۳۹۸/۱۱/۲۷

Hydrogel structures with morphological features at microscale have various applications in tissue engineering and regenerative medicine due to their ability to induce cellular behavior in a controlled and desired manner. In a very recent study managed by Iranian researchers...

• 3DBioprinting, Activities, Technology
• ۰
• ۷۲۴
• ۱۳۹۸/۱۱/۲۱

۳D printing can be used for many industrial and biomedical purposes. Omid Afarinan company has recently produced an innovative product named Cranio® for treatment of diseases such as craniosynostosis, hemifacial microsomia (HFM), and hypertelorism in which a person is inflicted...

• News, news 1, Technology
• ۰
• ۱۰۸۷
• ۱۳۹۸/۱۱/۱۳

Over the last decade, the development of technologies such as 3D bioprinting has engendered paradigm shift in many scientific areas including plant biology. For instance, 3D bioprinted constructs of plant cells or inspired by plants decipher information about single-cell,...

• Bioprinting Event, Technology, Workshops
• ۰
• ۴۷۲
• ۱۳۹۸/۱۱/۰۶

For the first time, the team of experts at OmidAfarinan Mohandesi Ayande, the first commercial group focusing on 3D Bioprinting in Iran, hold Special Training Courses and Workshops in the following context Training (Theoretical And Practical) Workshops Comprehensive Course...

• 3DBioprinting, News
• ۰
• ۴۵۰
• ۱۳۹۸/۱۰/۳۰

Scientists at the University of Huddersfield have pioneered the development of a new technique (named SLAM) for using 3D printing to produce soft gel medical implants customized to the needs of individual patients      

• News, Technology
• ۰
• ۴۵۲
• ۱۳۹۸/۱۰/۲۲

     In a collaboration between Georgia Tech, Emory and Children’s Healthcare of Atlanta, a patient‐specific 3D bioprinted model based on modified gelatin was developed for treatment of pediatric cardiology