PioneerX2 is a dual printheads bioprinter based on mechanical micro-extrusion technique which enables researchers to have maximum control on the bioink extrusion, especially hydrogels and cell-laden bioinks, by managing the flow rate and deposited volume. This bioprinter allows the construction of tissues and organs for regenerative medicine, or drug screening. The compact design, intuitive user-friendly interface, and economic price make it one of the most competitive bioprinters in the market.
![]()
- ۱-Two separate printing modules.
- ۲-Piston micro extrusion actuator with a torque of 100 N.cm.
- ۳-High-temperature printing module up to 220 ° C.
- ۴-Ability to mount low-temperature modules down to 4° C depending on environmental conditions.
- ۵-Ability to control the print bed temperature up to 80° C.
- ۶-Ability to control the print bed temperature down to 4°C depending on environmental conditions.
- ۷-UV crosslinking with wavelength from 365 to 405 nm.
- ۸-Ability to mount visible light crosslinking module.
- ۹-Ability to mount the FDM module.
- ۱۰-The 5-inch touch screen user interface.
- ۱۱-UV light sterilization with UVC lamp.
- ۱۲-Ability to install coaxial printing module.
- ۱۳-Metallic body with a furnace color (laboratory equipment standard).
- ۱۴-The ability to install a HEPA14 filter and fan to create a sterile environment.
- ۱۵-The possibility of using Luer Lock needles with an inside diameter of 0.1 to 1 mm
- ۱۶-Motion accuracy up to 0.02 mm
- ۱۷-The print speed is from 0.1 to 50 mm/s
- ۱۸-Print dimensions of the 90 * 90 * 60 mm
- ۱۹-Command monitoring and reporting system of the print process
- ۲۰-device dimensions: 570*450*530 mm
- ۲۱-Weight: 45 kg
