Specifications:

• ۱-Four separate printheads.
• ۲-Piston micro extrusion actuator with a torque of 100 N.cm.
• ۳-High-temperature printing module up to 220 ° C.
• ۴-Ability to install low temperature printing modules down to 4° C depending on environmental conditions.
• ۵-Ability to control the print bed temperature up to 80° C.
• ۶-Ability to control the print bed temperature down to 4°C depending on environmental conditions.
• ۷-UV crosslinking with wavelength from 365 to 405 nm.
• ۸-Ability to crosslink with visible light.
• ۹-Ability to install the FDM module.
• ۱۰-The 5-inch touch screen user interface.
• ۱۱-Ability to install coaxial printing module.
• ۱۲-Metallic body with a furnace color (laboratory equipment standard).
• ۱۳-The possibility of using Luer Lock needles with an inside diameter of 0.1 to 1 mm.
• ۱۴-Motion accuracy up to 0.02 mm.
• ۱۵-The print speed is from 0.1 to 50 mm/s.
• ۱۶-Print dimensions of the 90 * 90 * 60 mm.
• ۱۷-Command monitoring and reporting system of the print process.
• ۱۸-Device dimensions: 650*450*700 mm.
• ۱۹-Weight: 65 kg.